Industrial
    Centrifugal Pumps

Bronze
General specs in chart below.
For more detailed information, click here to view the list of spec sheets available.

Flow:
 1-100 GPM (3 - 380 LPM)
Pressure:
 0-60 PSI (0-4.1 BAR)
Performance:
 Flow drops to zero with maximum pressure output.
Suction Lift (Water):
 Zero for straight centrifugal. 15 ft. with foot valve (4.6 meters) Self-priming models to 20 ft. (6.1 meters)
Liquid Cleanliness and Viscostiy:
 Clean or contaminated. Cannot pump viscous liquids above 2000 SSU.
Liquid Compatibility:
 Most common liquids.
Noise:
 Extremely quiet.
Power Required:
 Least amount to start and operate; maximum amount at wide open flow and zero pressure; power demand decreases with pressure increase.
Discharge Line:
 May shut off for extended time periods.
Bearing Lubrication Required:
 No
Temperature:
 -40 degrees F. to 250 degrees F. ( -40 degrees C to 122 degrees C)
Seal Arrangement:
 Mechanical
Types:
 Close coupled and pedestal

Click here for contact information.


 

Aluminum

Flow:
 0-100 GPM (0 - 380 LPM)
Pressure:
 0-60 PSI (0 - 4.1 BAR)
Performance:
 Flow drops to zero with maximum pressure output.
Suction Lift (water):
 Zero for straight centrifugal. 15 ft. with foot valve. (4.6 meters) Self-priming models to 20 ft. (6.1 meters)
Liquid Cleanliness and Viscosity:
 Clean or contaminated. Cannot pump viscous liquids above 2000 SSU.
Liquid Compatibility:
 Compatible liquids
Noise:
 Extremely quiet
Power Required:
 Least amount to start and operate; maximum amount at wide open flow and zero pressure; power demand decreases with pressure increase.
Discharge Line:
 May shut off for extended periods.
Bearing Lubrication Required:
 No
Temperature:
 -40 degrees F. to 250 degrees F. (-40 degrees C to 122 degrees C)
Seal Arrangement:
 Mechanical
Types:
 Close coupled and pedestal


Click here for contact information.


Plastic

Flow:
 0-200 GPM (0 - 75 LPM)
Pressure:
 0-50 PSI (0-3.5 BAR)
Performance:
 Flow drops to zero with maximum pressure output.
Suction Lift (water):
 Self-priming models to 20 feet. (6.1 meters)
Liquid Cleanliness and Viscosity:
 Clean or contaminated. Cannot pump viscous liquids above 2000 SSU.
Liquid Compatibility:
 Corrosive liquids and chemicals.
Noise:
 Extremely quiet.
Power Required:
 Least amount to start and operate; maximum amount at wide open flow and zero pressure; power demand decreases with pressure increase.
Discharge Line:
 May shut off for extended periods.
Bearing Lubrication Required:
 No
Temperature:
0 degrees F. to 180 degrees F. (-18 degrees C to 82 degrees C)
Seal Arrangement:
 Mechanical
Types:
 Close coupled or pedestal

Click here for contact information.